On the lookout for a way to jazz up your wall artwork? Test making your personal Do-it-yourself acrylic frames for individualized 3D artwork. This post will walk you via accurately how I made these in my household.
If you are looking for a personalized way to body your images or artwork to make it stand out from the wall, these Diy acrylic frames are the best factor.
I landed on these frames since I necessary a very little anything to incorporate a minimal added pizzazz to my toilet wall. 
We decided to include my spouse&rsquos like of golfing into the combine by printing shots he took of PGA golf classes he&rsquos performed in black and white.
I enjoy when artwork is a discussion piece, so this was the perfect addition to the toilet wall.
To make it truly stand out, I built these Do it yourself acrylic frames for every of the images.
Below are the actions I took&hellip 
Desk OF CONTENTS
- one. Gather your supplies.
- two. Tape each individual facet of every corner.
- 3. Mark where by you want to drill your holes.
- 4. Drill your holes.
- 5. Use Clicking Here to safe your images to the body.
- 6. Mark the total on the wall exactly where you program to hold it.
- seven. Use your punch device to mark the total on the wall.
- 8. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- 10. Attach your body to the standoffs.
- eleven. Revel in the concluded solution!
Disclaimer: This write-up does involve affiliate links for your convenience. This is at NO more value to you but earns me a compact commission. To read through additional, verify out our disclosure policy.
one. Gather YOUR Elements.
1st issues to start with, acquire all your elements. All sources for every little thing I employed are linked underneath. I also provided a checklist with backlinks of what we employed to hang the frames, much too. 
FOR Creating THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (a single for the size of the opening of your standoffs and a person for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Tool (I made use of a Sharpie)
FOR HANGING THE Diy ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
2. TAPE Each and every Side OF Each individual CORNER.
Plexiglass/acrylic is incredibly delicate.
Simply because of this, you have to be really very careful when you are drilling the holes.
Positioning a piece of painter&rsquos tape on both facet exactly where you plan to drill your hole will support continue to keep the acrylic sheet from breaking or cracking when you drill.
I also retained the protecting go over on just about every facet of the piece, much too.
three. MARK The place YOU WANT TO DRILL YOUR HOLES.
Once you have positioned the painter&rsquos tape on all four sides (or however numerous sites you prepare to drill a hole), you can area a mark of exactly where you want to drill your hole.
I drilled my holes one&Prime in from just about every edge as you can see from the photo earlier mentioned.
four. DRILL YOUR HOLES.
Prior to basically drilling, double and triple test that your marks are level both of those horizontally and vertically.
You&rsquoll want to have these stage for when you hang them. 
The drill little bit you pick out need to be massive adequate to let the standoff to suit within the gap.
I would do a examination run on a piece of scrap material to make certain it is significant adequate. 
At the time you are sure that the marking are degree and the bit is huge plenty of, you want to commence drilling.
Listed here is a superior movie to adhere to if you would like a demonstration on how to drill as a result of acrylic.
You want to use about 50 % electrical power when you are drilling.
Gradual and constant. If you go to quick, the acrylic will crack, so just take your time.
As you drill you must see spirals of the acrylic little by little getting taken off. 
Repeat the drilling for every single gap you have to have.
5. USE YOUR GLUE DOTS TO Secure YOUR Images TO THE Body.
Once your holes are made, you can add your photograph to the piece of acrylic/body.
The crucial listed here is to all over again, make sure your photo is amount in advance of you fully protected it to the frame.
The glue dots are really sticky and don&rsquot permit for a good deal of wiggle place, so it may well be a very good thought to line up a piece of lined paper driving the body to support you line the edges of your image.
No matter what trick functions for you to make positive the image receives glued to the body degree will do. 
six. MARK THE Total ON THE WALL Exactly where YOU System TO Hold IT.
As you start out to cling, mark your holes on the wall, but make certain your body is stage.
If you measured correctly in the phase ahead of drilling, the holes on your frame really should by now be level.
If you are hanging a lot more than a person body like I did, make absolutely sure every single frame is stage in your grid, far too. 
seven. USE YOUR PUNCH Software TO MARK THE Entire ON THE WALL.
I appreciate this resource so a lot because it gets your hole commenced and permits your drill to continue to be in location when you begin drilling.
If you don&rsquot have 1, I very advise it!
8. DRILL YOUR HOLES IN THE WALL.
Be guaranteed to use a little bit that suits the screws that came along with your standoffs.
This will most most likely be a lesser little bit than the a person you utilized on the frames.
I also applied a stud finder to see if I wanted drywall anchors, but for the reason that these frames are not that weighty, you could most likely do without them.
nine. SCREW THE STANDOFFS INTO THE WALL.
Once you obtain your standoffs, you&rsquoll see how they function.
In order for the photo to &ldquostand off&rdquo the wall, you have to safe the standoff with the provided screw ahead of attaching the photograph to the standoffs.
As you can see from the photo, creating absolutely sure almost everything is level and calculated accurately is super significant. 
ten. Attach YOUR Frame TO THE STANDOFFS.
As soon as you&rsquove connected the standoffs, it&rsquos time to connect the images!
Line up the standoffs with your drilled holes and safe the standoffs.
If all goes very well, almost everything will line up correctly and be ready to go!
If you are like my father and I, you&rsquoll arrive across at minimum just one that doesn&rsquot line up properly.
For this, we cheated a small bit and secured the standoff to the frame and employed a glue dot to protected it to the wall, so it didn&rsquot shift.
We only had to do this for two corners of two frames, but don&rsquot be concerned if you mess up 1&hellip We&rsquove been there! 
eleven. REVEL IN THE Finished Item!
Now it&rsquos time to delight in your operate!
We did a grid of nine total photographs which was a major undertaking with all the measuring, but I&rsquom in adore with how it turned out.
Enable me know in the reviews what you imagine of the finished product!
Leave a Reply